SpoolMasterTM

Years ago I was working for Kalmar Nyckel during a winter maintenance period where we were scheduled to make a pile of new stays and shrouds.  We had a few huge spools of white polyester cable and hawsers that eventually needed to be turned black for good looks and extra ultra violet light protection.  "We could paint them by hand." was one suggestion.

Eventually we decided on running the cables through a half latex paint, half water solution, which works very well absorbing into the cable giving a nice coating.  There was one problem.  How do we effectively dry such an amount of cable without taking up too much space, getting paint everywhere, or dirt on the new cable?

And thus the SpoolMaster5000TM was born.

*images, drwing, of the painting process coming soon

Today I work with the Swedish East India Trading Company ship replica Götheborg.  Here we also have our own unique problems.  We make all of our own rope for rigging the ship.  The material we use to make the rope is hemp, and the material we use to preserve it is pine tar.  One thing is the same, the rope must be coiled.

Please welcome SpoolMaster5000TM-OldschoolEdition to the club.

No glue was harmed during the creation of this SpoolMasterTM.

I promise you, all of the joints didn't fit this neatly.

mast cap

Need a mast cap??

There was a blue light special on mast caps at k-mart, so i went out and got one.

Penelope - wheel taking shape

I don't have a lathe, router, or handy sanding drums.  Perhaps patience will have to shape her.

Updates on Penelope

On my way to sailing a Weekender class pocket yacht.

Won't be long now I hope!

easychair

A fun little job that puts several skills to work.

 start with some sailmaking

little light carpentry

a spot of rigging

et voir là!

Getting started again

Entryway Settee

for Ry...

I have a new project in mind, it involves a partially distressed oak plank.

Propped up to dry after a thorough power washing.


Plank sanded with holes drilled for the legs. Beginnings of planing the squarish legs to fit the round holes.



Legs planed and pounded in.



Applying linseed oil. Man this thing is dry, it probably took a quart.



Taking shape now, drying in partial shade. Linseed oil uses oxygen to cure. I'm taking this time to check on it every few minutes, hitting spots again that are sucking in the oil, and ragging off excess.


Done.

Wood

n. the hard, fibrous substance composing most of the stem and branches of a tree or shrub, and lying beneath the bark.

Building anything from wood has been a passion of mine since early childhood. It is a passion that I often find myself returning to after long periods of being away from home, I just love it. I love picking up a board, log, branch, or old piece of furniture, finding the truth in it, letting it speak to me, and allow me to put it to work as something useful and beautiful above its own beauty.

I am no master craftsman and I cannot even say that I am more than a novice at the art of working with wood. I have however, picked up or created a few tricks throughout my life. I know what I like to see in a project and am not content until I achieve such. Quality workmanship is of utmost importance, also emphasizing unique artistic designs, practical utility, and natural materials from every project I endeavor.

This retro-inspired entertainment center was a simple project I created out of some reclaimed pallet lumber. The construction consisted of all various types of pines like white pine, hemlock, and perhaps some fir, finished with a few coats of linseed oil. This piece is fastened entirely with recycled pallet nails that were found lying around the shop floor. I milled in some grooves in the upper and lower boards to accept the upright pieces for a snug and more secure joint.

Here is another small project created out of what wood was at hand. I had no idea on a design, save for the need of a bookshelf, so I let the wood speak to me. Eat your heart out Ikea. Simple table saw milled joints cut into the rails to accept the shelves and fastened with some old copper nails for a touch of rustic class. After a quick sixteenth of an inch trimmed of of one leg she sat tall and true. The hardest part was finding the angles to cut the grooves for the joints. It came to be probably just under two degrees, set the sliding fence, zip zip zip, twenty minutes later, four complete rails emerged. There was no need for squaring or plumbing up, just lay it up, fasten, and hope for the best. If it looked right going together, it probably was. Trust your eye.

The utility of wood, this wonderful workable renewable resource, never seems to end. All of my projects thus far have been entirely of reclaimed and reused materials. It will be interesting to see how long I can continue this way. Perhaps as long as there will be free wood lying around, there is a project to be conceived.

Fid

n. a tapered implement, made of wood, iron, bone, or other dense workable material, used to aid in splicing by separating strands of a rope.

In February of this year I had the pleasure of visiting Her Majesty's Historic Shipyard in Portsmouth, United Kingdom. With two historic ships amazingly intact, and half of a preserved hull from a sixteenth century warship, the Mary Rose, this piece of history is one of a kind, and definitely well worth the visit for me. I only wish I could have spent weeks there researching those vessels.

After inspection of the HMS Victory via a guided tour, I got to talking to Ben, the officer on duty for the day. He was very enthusiastic about the ship and eager to chat with me about her, two traits I really appreciated. I can not recall how long we were engaged in conversation. As we discussed rigging and the hull, our chats led us into a rigging workshop that is due to be demolished to make way for the new Mary Rose museum. Ben handed me a piece of copper sheeting removed from the hull as he told me about some of the various methods of preservation and maintenance, like the removal of most of the copper sheeting since the ship will most likely never touch water again, and told me to keep it. I was also graciously gifted a trunnel from the upper deck replacement and quite a large shiver of a deck beam. The people at the airport didn't seem to like my gifts as much as I did. Even though "Piece of oak" is not listed in the dangerous, do not carry on and airplane list.

Upon returning to Sweden, and after proudly showing off my cool new souvenirs, I had decided to turn the unusable hunk of history into a nice, salty, usable tool; a fid. I knew immediately that I did not want any sort of modern implement to come anywhere near my 250 year old relic, so I climbed aboard the East Indiaman and went straight for the carpenter. One of the coolest tools on board was the smithed draw knife, which was just about perfect for the job I was about to accomplish. I worked the oak into a nice shape relrelatively quickly. After completely to my liking I massaged in a couple coats of linseed oil to give it some traditional protection, not to mention a beautiful almond color.

The piece of oak was large enough to wield a nice wide 14" fid, a perfect complement to my ditty bag. I can not wait to put it to use! There is definitely some hardcore tallship street-cred to have not only a hand carved oak fid, but a relic in the ditty bag. The spirit of Nelson himself is in that fid!